Blogs
on July 19, 2022
People who consider building a home rather than buying one have the advantage of being able to choose where they want their switches and sockets to be located, and people who want to modify their home can also choose where they want their receptacles and switches to be located. Before beginning the electrical installation, a thorough investigation should be conducted to eliminate the usage of tangled cords and power bars, which would not only protect your home from harm but also make everything more convenient to use.
For a two-bedroom residence, here are some guidelines from top electricians Spokane WA for the placement of switchboards and sockets:
Materials for switchboards and sockets must be fire-resistant, with a fire rating of at least 2-3 hours, and a poor conductor of electricity.
Whether the proposed electrical work is a new installation or an expansion of an existing one, or a modification involving major changes such as the addition or removal of switchboards, the electricity supply undertaking must be consulted as early as possible about the feasibility, etc.
The installation work must be done by a certified contractor with a valid permit.
Guidelines for Planning of Electrical Installations
In the event of a refurbishment, the current wiring and switchboard conditions must be taken into account.
The location of receptacles is usually determined by the consumer's needs, as well as the type of load, occupancy, and anticipated load.
The atmospheric conditions must also be examined before the installation.
The possibility of future change or extension must be anticipated ahead of time.
Fire-resistance and electric-shock prevention methods
General Guidelines for Placement of Switches by Moses Lake electric company
Nowadays, there is a requirement to have an adequate number of switchboards and sockets based on the application; failure to address these variables might result in tragedy. To avoid a situation like this, keep the following recommendations in mind:
Socket outlets for equipment that utilize up to 15A of power, such as air conditioners, water coolers, and washing machines, must have their own fuse with an appropriate backup fuse or tiny circuit breaker.
On the live side of the line, the switch that controls the socket-outlet must be located.
Posted in: Business