When it comes to vitamin C, I'm sure many people are no strangers to it. It is not only a very common nutrient in daily life, but it is also an essential nutrient for the human body. And vitamin C is a kind of vitamin that exists in food and can be used as a nutritional supplement. In recent years, as people pay more and more attention to health, all kinds of knowledge about health also spread, 天然萃取維他命C推薦and vitamin C has also become the so-called "miracle drug". Cold, tired when eating vitamin C, insomnia when eating vitamin C, see the patient to send vitamin C.
A small tablet of vitamin C seems to have become a cure for all diseases "miracle drug". 天然萃取維他命C推薦Vitamin C is really so magical? In fact, vitamin C is mainly found in living organisms and is produced by metabolism, but there are many exceptions.
Vitamin C supplementation has been shown to help lower uric acid levels in patients with hyperuricemia, as well as fasting glucose and glycosylated hemoglobin levels in patients with type 2 diabetes, and to improve vascular endothelial function in various populations. However, in general, healthy adults do not need to intentionally supplement with vitamin C. A well-balanced diet is more recommended, 天然萃取維他命C推薦and proper supplementation is only needed if there are severe cases of paranoia or malnutrition.
Reminder: Despite the many benefits of vitamin C, don't be tempted to take it! Keep these three points in mind and take them safely for better health
1. Eat in moderation
When taking vitamin C, be sure to control your intake. Although the toxicity of vitamin C is relatively low, if we consume too much vitamin C, for example, more than 3,000 milligrams of vitamin C per day, it can lead to a number of adverse reactions. Including diarrhea, gastrointestinal disorders, uric acid excretion will be affected to some extent, which will have an impact on health. So usually must pay attention to control the dosage, follow the doctor's instructions reasonable use of drugs, in order to better maintain health.
2. Do not use long-term
If we carry on taking vitamin C for a long time, it is easy to appear to lead to the formation of systemic stones, this is because the lack of vitamin C is mainly produced in the usual eating fruits, vegetables and other national food problems. However, if you do not take vitamin C tablets directly, it will affect the formation of stones that lead to the formation of stones, leaving you in a bad condition. In addition, taking vitamin C tablets consistently for a long time can also increase the risk of deep vein thrombosis.
3. Don't take them on an empty stomach
If you have recently had a peptic ulcer, do not take vitamin C. Taking vitamin C at this time can easily irritate the ulcer, leading to worsening of the condition and even stomach bleeding. In addition, be sure not to take vitamin C on an empty stomach, otherwise it is easy to irritate the stomach.
According to the survey, taking vitamin C tablets in large quantities for a long time is also easy to reduce body resistance and produce side effects when treating some diseases. People take a certain amount of vitamin C tablets, not more than two tablets per day. If it is more than two tablets, it is likely to have great side effects.
Related articles:
Vitamin C intake has many benefits, but don't take it indiscriminately!
Vitamin C works well, but be careful not to overdo it
Reminder! These 7 types of people should take extra vitamin C supplements
Be the first person to like this.
With the development of science and technology, pcb stackup calculator more and more electronic products have been produced. An essential part of electronic products is the Printed Circuit Board (PCB), which is a substrate connecting various components. Therefore, PCB design is very important. In the process of PCB design, the PCBBRD file and PCBBRD file generated by PCB design software play a very important role. However, many people will find that PCBBRD files and PCBBRD files are large, and the file size usually reaches hundreds of MB, or even several GB.
Pcb brd file, what is the reason why pcbbrd file is too large?
So why are PCBBRD files and PCBBRD files so big?
First, the PCBBRD file and PCBBRD file contain a lot of information about PCB components. In PCB design software, each component has its own specific properties and values, 1 oz vs 2 oz
such as coordinates, dimensions, directions, and so on. These properties and values will be written to the PCBBRD file and PCBBRD file to facilitate subsequent manufacturing and testing.
Second, PCBBRD files and PCBBRD files also contain a lot of graphic information. In the PCB design software, the shape, connection line, text label, etc. of each part need to be graphically drawn, and these drawing information will also be written into the PCBBRD file and PCBBRD file. Graphic information takes up more file space than property information.
Pcb brd file, what is the reason why pcbbrd file is too large?
In addition, the PCBBRD file and the PCBBRD file also contain the data of the system circuit through simulation. In the process of PCB design, engineers need to analyze and simulate the control circuit to ensure the normal management of the entire circuit. Therefore, the PCBBRD file and PCBBRD file will also contain various electronic circuits and simulation data of the enterprise, and the storage of these information data will also occupy more space for file development.
In addition, because the information contained in PCBBRD files and PCBBRD files is more complex, the file formats they use are also more cumbersome. Commonly used PCB design software supports a variety of file formats, such as TXT, XML, BRD, PCB, etc., but in practical applications, PCBBRD files and PCBBRD files are usually used. The dumpster or. BRD format, these formats are mostly binary files, so the file will take up more space.
In summary, the PCBBRD file and PCBBRD file are so large because they contain a lot of PCB component information and graphic information, as well as circuit simulation data. At the same time, the file format is complex. In order to solve this problem, some optimization methods can be adopted, such as deleting unnecessary components, simplifying graphic information, etc., so as to reduce the file size and improve the engineering efficiency.
Be the first person to like this.
When you live at home, you need to wash the dishes every day after three meals. In the face of a large pile of plates, dishes and chopsticks in the kitchen, many people just brush them, without considering that there are also rules for washing dishes. Here is some knowledge about dishwashing, so that we can pay attention to science, hygiene and health protection.
Many people eat after the pots and pans to the kitchen sink inside a throw,natural sponges for dishes when the time is happy when to brush or save to the next meal after the brush together. This is not good, because the dishes soaked into the sink, food residues and grease to the bacteria provide a rich nutrient, to their reproduction to create favorable conditions.
1. Brush dishes as soon as possible after meals
There are a lot of germs and bacteria attached to the dishes after eating. If you don't clean up in time and wait for these viruses and bacteria to multiply for a period of time before scrubbing, a certain amount of viruses and bacteria will be left on the dishes. These viruses and bacteria may enter the human body during the next meal, causing certain health effects, especially the elderly and children with weaker immunity and resistance are more likely to be infected with viruses and bacteria. Therefore, wash and scrub the dishes as soon as possible after meals.
2. Dishwashing detergent must be rinsed out.
Detergent has become a necessity in our lives, and every household uses it when cleaning dishes. Detergent has a strong ability to remove oil and dirt, and the dishes cleaned with it look especially clean. Detergent is extracted from petroleum. Its main ingredient is sodium dodecylbenzene sulfonate, and the other ingredients are sodium fatty alcohol ethyl ether sulfate, foaming agents, solubilizers, thickening agents, industrial flavors, preservatives, colors, and water. Detergents contain benzene and benzene derivatives (sodium dodecyl benzene sulfonate). These two substances cannot be effectively broken down in the liver and will accumulate in the liver, and when a certain amount is reached, it will lead to liver disease. Benzene and benzene derivatives can cause cancer.
According to research, the increasing incidence of cancer is related to the following three reasons: one is the pollution of the atmosphere and water; the second is the fertilizers and pesticides inside the fruits and meals; and the third is the chemicals in the food. The detergent we use is chemical substances, of which the stupid carcinogenic. Therefore, when washing dishes with detergent, make sure to rinse with a lot of water to ensure that the detergent is clean.
3. Natural detergents are recommended
There are many natural detergents such as hot water, flour, lemon, rice water and salt. These detergents are effective in removing stains and grease, but this is not a good idea when there is heavy oil on the dishes.
Traditional detergents such as cooking soda and baking soda can be used when grease stains are too heavy. Is cooking soda considered a mild detergent. As you know, cooking soda is a kind of alkaline alkaline detergent, and its main ingredient is compounded with surfactants and other ingredients, which is more effective in removing oil. Baking soda oil effect is quite good, add a little baking soda in the dishwashing water, can effectively remove the oil in the dishes, especially hot water bottles with dirt, just pour a little baking soda into the hot water for a period of time, the hot water kettle odors and dirt can be removed to a clean slate.
4. Always wash the bottom of the bowl when you brush the bowl
Many people brush the bowl, the bowl of the internal wash very clean, but neglected to clean the bottom of the bowl. This is easy to cause pollution. We usually wash the dishes after the bowl, clean up the way is the bowl stacked bowl, plate stacked plate storage, that the bottom of the bowl and the bottom of the plate of bacteria will be brought to the other bowl, plate, resulting in mutual contamination, so wash dishes can not be ignored when this detail.
5. Dishcloth should be changed often
Many families dishcloth, no bad time rarely thrown away, think clean as used. According to the Chinese Center for Disease Control and Prevention released data, dishcloths exist in E. coli, Staphylococcus aureus, Salmonella and other 19 kinds of common pathogenic bacteria. If a dishcloth is used for a long time, the total number of bacteria will be as high as about 500 billion! In order to ensure health, it is recommended that the use of dishcloths, a special cloth, dishwashing, washing pots and pans, wipe the stove hood, cleaning table rags separate use; two is often replaced, a month or quarterly replacement; three is no matter what kind of dishcloths, try to wring out the unfolding of the use of the cloth, placed in a ventilated dry place, so as to avoid the breeding of bacteria in a humid environment; fourth, it is recommended to disinfect dishcloths before dishwashing, you can use boiling water, can be used microwave oven heating on high heat, can be used in a microwave oven. It can be boiled in boiling water, or heated in microwave oven for 2 minutes or put in the sun for half an hour, and of course, it is best to use ultraviolet ray to sterilize the cloths when conditions permit. 6.
6. Don't use rags or paper to dry the dishes after washing.
Many people feel that it is cleaner to dry the bowl with a rag or kitchen paper after washing. Doing so is tantamount to adding to the problem, making the originally clean bowl re-contaminated with the bacteria in the rag. Kitchen paper is meant to be used as a disposable kitchen rag, not for sanitizing. It has the advantages of oil absorption, convenient, hygienic, to avoid bacterial growth, and meet the safety and health standards of Kleenex, toilet paper, can be used for dishes to remove stains, grease the initial treatment, can replace the detergent, but the last but also to use clean water to wash the dishes, to avoid the residue of toxic and harmful substances. At the same time can not put the wet dishes directly into the cupboard, because the relatively sealed cupboard is also easy to breed bacteria. It is recommended to drain the dishes upside down after washing them, and to dry the chopsticks before putting them away.
Related articles:
Check out the 6 mistakes in dishwashing, how many have you hit?
Kitchen grease heavy corner greasy, do a good job of cleaning a few places
Kitchen Tips: How to clean a dishwashing sponge?
Be the first person to like this.
September 29, 2023
47 views
My editor recently started enjoying cooking and while cleaning the kitchen they discovered something very interesting, a kitchen magic eraser.swedish dishcloth manufacturer So I did some research on this and felt like it was a really interesting tidbit of information, and in fact, the answer may be simpler than people think, and some people want to talk about it here.
The exact name of this white cleaning sponge on the market probably depends on which brand you buy. Magic Eraser and Eraser Crane are both this stuff.biodegradable sponge For a lazy person like me, it's a very practical thing to do. For example, just dipping it in some water and casually rubbing it will remove tea stains that have accumulated over the years, and save you from having to dirty the stove. Also, when you use this stuff, you get a feel for how it performs differently than a regular dishwashing sponge. For example, this stuff isn't actually that soft to squeeze and is kinda inflexible. It can be easily torn into small pieces, it will wear like rubber...
So, how exactly did it we develop to work?
First, let's take a look at what this sponge is.melamine cleaner Its common name is actually melamine sponge, and "melamine" refers to melamine resin, which is the product of the polymerization of melamine and formaldehyde molecules (two names that don't sound good, but the polymer is non-toxic).
The material and structure of the melamine sponge is key to its cleaning capabilities. It actually uses a fairly hard polymer that forms a fine three-dimensional network structure (an "open-cell foam" to be exact). As a result, there are many tiny raised structures in the cross-section of the melamine sponge, and these structures are quite hard. When these sponges are used to wipe the surface of an object, these little bumps actually act as a polish - just like fine sandpaper.
Polishing also explains why you don't need to add detergent to melamine sponges. It also determines that melamine sponges are not suitable for cleaning surfaces that scratch easily.
Another interesting thing about melamine sponges: these sponges were not originally intended for cleaning. Melamine sponges were actually used as sound-absorbing and heat-insulating materials. Another advantage of this stuff as a building material is that it is inherently fire-resistant. When heated, it produces nitrogen gas, so it doesn't burn easily.
精選文章:
The correct use of konjac sponge and precautions
Kitchen Tip: How to clean a dish sponge?
This "cup brush" for cleaning bottles is also called melamine formaldehyde foam! Do you still dislike traditional dishcloths?
Be the first person to like this.
At present, sponge production mostly adopts one-step box foaming method, mixing all kinds of raw materials at high speed and adding them into the molding box quickly to complete the chain growth of the molding box, foaming, crosslinking and curing to complete the sponge production.Konjac sponge company The process is short, low material viscosity, easy to control, energy saving, low investment in equipment and wide density range. Sponge is a kind of dry and soft polyurethane foam. Due to the structure of porous honeycomb, it has excellent flexibility. Water absorption and waterproof characteristics, widely used in sofas, mattresses, clothing, soft packaging and other industries.
Polyurethane foam
1.Main raw materials
Polyether polyol
Most sponges use low functionality (2-3), low hydroxyl value, high molecular weight polyether propylene glycol and polyether propylene glycol.
2. Water is essential in the production of sponges. The reaction of water with aqueous TDI releases CO2 gas and also acts as a chain growth agent.
3.Catalyst
Stannous octanoate and dibutyltin are catalysts that promote the reaction using polyether poly more alcohol and isocyanate. Promoting the role of crosslinking can be reacted to promote the use of isocyanate and water reaction between CO]2 Triethanolamine is a catalyst for gas .karesponge Triethylene diamine . Triethylamine etc.
5. External foaming agent
Usually used for low boiling point fluorocarbons such as monofluorotrichloromethane (F-11). Cyclopentane is usually used instead of cyclopentane. e-11, or dichloromethane, works well. If you do not produce a very light density sponge,bulk sponges for cheap you can also adjust the ratio of the main raw materials and do not use an exogenous agent.
6. The principle of sponge synthesis
In the synthesis process of sponge, there are mainly chain growth reaction, foaming and cross-linking process, and these reactions are related to the molecular structure, functionality and molecular weight of raw materials.
精選文章:
Discover the Konjac Sponge: a natural and gentle skincare wonder
Do you know how polyurethane sponge is made?
What causes polyurethane sponges to crack?
Be the first person to like this.
In life, we often encounter these situations. Good clothes are stained and can't be washed. It is a pity to throw them away, and it is not comfortable to wear and look at the stains.
Long-term housework, some of the traditional furniture in the home, day after day, will always leave us some with stubborn stains, exhausting a variety of management methods can not be removed.china konjac sponge Today, this way for you to organize the following methods to remove these common stubborn stains, quickly learn it.
1. Stained clothes
When washing clothes, we often encounter clothes are stained, and the color will be dyed to penetrate, the general cleaning can not be washed out. This time, you only need to add disinfectant to the water and soak it for 25 minutes.cellulose dishcloth wholesale Take it out and wash it, and the clothes will be as clean as before.
2. Oil stains
Doing housework or going out to eat, accidentally our clothes will be stained with oil stains, if not washed, the oil stains stay on the clothes will be difficult to clean. scrubber wholesaleThis time you just need to take a little toothpaste, apply on the oil stains, drop two drops of water, rub with your fingers until the foam completely covered in oil stains, and then rinse with water can be.
3. Rust
Some items get rusty after a long time of use at home, and when we accidentally rub it on our clothes, it's hard to wash it off. Just one lemon, squeeze the lemon juice on the rusty clothes and scrub it vigorously. Remove most of the rust stains and scrub with soap.
4. Gas Stove Stains
After using the gas stove for a long time to cook, the grease and stains left by our long-term cooking can easily accumulate in the corners of the gas stove. Because of the long-term cleaning is not in place, this stain is thicker, with ordinary detergent is difficult to wash off. At this time to find out a little white vinegar drops in the accumulation of stains, acid can be very good decomposition of oil stains. This time in accordance with the ordinary cleaning methods will be able to.
5. Stickers residue
Usually buy tableware, a variety of daily necessities, etc., above we will put a label. After the label is torn off, the following will often remain a layer of self-adhesive problems, it is difficult to gouge by hand to gouge off, and will affect the very sticky. At this time only need to pass an eraser, hard to erase the surface, the top of the residue will be very easy to clean up.
6. Notes stains
When a fountain pen accidentally left traces on the clothes, even if we wash it immediately, it will leave ink stains. When cleaning, add the right amount of baking soda and toothpaste to the water, then add the right amount of water to the stain and scrub, the ink and pen will be easily eliminated.
7. Grass stains
Kids are naturally active and grass stains can easily stain their clothes. We all know that vegetable juice is a good stain and it is not easy to clean up when it stains. Mix salt and water well in the ratio of 1:10, immerse the clothes in the water and clean it after ten minutes.
8. Old tea stains
Tea cups are often used to drink tea, it is easy to produce tea dirt, resulting in the accumulation of dirt color after the tea cup. Even if you often rinse it, you can not wash off its color. Soak the cup in salt water for 10 minutes, then gently brush the cup with a small toothbrush inside, and the cup will be as clean as before.
9. Blood Stains
Occasionally in daily life, you will have a skin break and bleed, or accidentally cut your fingers. Blood stains will be left on the clothes. For fresh blood stains, never wash them with hot water or they will turn black, wipe them under cold water. If it is old blood stains, buy a bottle of 3% hydrogen peroxide, will have blood stains in the place of soaking into the hydrogen peroxide, and then removed from the water rubbing hard, and then get under the water to rinse clean to remove blood stains.
10. White shoes yellow
White shoes are very versatile, in our daily life is very favorite. But every time after cleaning will find that the shoes will turn yellow. In the face of this long-term cleaning yellow shoes, we can use toothpaste to clean it, so that the shoes will be washed out very white. And when drying the shoes covered with paper towels, after drying the paper towels will adsorb the yellow color on the shoes.
Be the first person to like this.
In the workplace, we can face a variety of problems every day need to go through the processing of affairs, some will feel clueless, think of what to do, often appear to pay a lot of effort, but the final result is very poor. online pdf conversion free We need to constantly change the way we do things, improve management of their work study efficiency. The following is to share with you how to effectively improve the efficiency of the work environment.
1 Keep a good working condition
Physical health and mental health are the basis of everything. scanned pdf to word converter online First of all, we should maintain a healthy diet and appropriate exercise to ensure that our body can meet the needs of work. Learn to control and regulate your own psychology and emotions, and face your work with a positive mindset.
2 Make a work plan and prioritize your work
Summarize the content of the day's work every night, analyze what has been completed, what has not been completed, what has problems, arrange the next day and the later work plan, according to the priorities of the matter to rationally arrange the plan.
3 Improve execution, simplify complex issues
Most people face some of the more difficult tasks, will choose to avoid procrastination, do not do the last, resulting in the final completion of bad. We can break down the complex task into smaller tasks, make a reasonable plan to complete, everyone will have a sense of accomplishment, more motivated and more efficient.
4 Ask for help. Professionals do professional things.
Inevitably in the work will encounter their own unfamiliar content, we can seek the help of professionals, which can help us quickly solve the problem. Don't fool around without making mistakes.
5 Learn some tricks and try new ways to automate repetitive tasks.
More and peers to learn cultural exchanges or through the use of information network technology to learn knowledge to master the work of some of the skills can provide to help us save a lot of time and improve their own work efficiency. For some of the problems we need to often do the work, we have to actively learn to try to use new methods to automate or more efficient to complete the task.
6 Learn to assign tasks and send them out
Human energy and time are limited. We can assign some unimportant work to others, or assign some work you are not good at to people who are good at it. For example, if you need to design a poster, you may not get a satisfactory result for a day, so we can ask other colleagues who are good at it or spend some money to get someone else to do it, which is more efficient and cost-effective than doing it yourself, unless you want to learn.
7 Learn to utilize tools
In our daily work and life, there are many areas where we can use tools to improve our productivity. For example, using some software such as pdf to process work and using some devices to increase productivity.
8 Centralization of similar work to reduce switching.
For some similar work needs we can try to focus on a one-time completion, do not come to switch the main content of the work, because you switch from one task to another is an important task to enter the social state, there will be more time loss in the middle.
9 do not be too obsessed with perfection
It's great to have high expectations of yourself, but if we are too obsessed with perfection, it will affect our productivity. There will always be small problems in accomplishing tasks, so don't be too concerned about those small flaws.
Be the first person to like this.
April 27, 2023
73 views
With the promotion of Industry 4.0 and intelligent logistics, domestic intelligent unmanned forklifts robotic forklift have been rapidly developing in the industrial manufacturing industry, and they play an indispensable and important role in intelligent warehousing. Why is this AGV handling robot so highly regarded? There are mainly three factors at play, and the robot takes you through them.
The warehouse can be automated in one way or another
Unmanned forklifts automate warehouse transportation. Forklifts that are unmanned greatly reduce warehouse personnel walking distances, increasing labor productivity, reducing labor intensity, speeding up the handling of goods significantly, and improving the level of automation in logistics and warehousing.
Transport can be made flexible
As a result of the sensors on the vehicle, the unmanned forklift can determine the exact location of the trolley according to the pre-set program, and drive the handling trolley automatically along the predetermined route. This system has several advantages, including high transportation efficiency, energy conservation, reliability, and flexibility.
Management of logistics should be improved
The trend of automated warehousing, the emergence of e-commerce, and the sharp increase in labor costs make AGV handling robots a trend, the traditional warehouse logistics labor efficiency is low, which has not been able to meet the needs of efficient operation of enterprises. AGV handling robots can achieve space and time efficiency in materials, to help speed up logistics, reduce occupied space, and achieve the best economic benefits.
As technology advances, unmanned forklifts will also play a more important role in warehouse management, so let's wait and see!
Related article reading:
Unmanned forklifts are widely used in warehouses for what reasons?
Intelligent unmanned forklifts are becoming increasingly popular for a variety of reasons
Your storage becomes more flexible with robot unmanned forklifts
Be the first person to like this.
March 20, 2023
81 views
Several scientific studies have shown that color is a very important sensory Spirulina companyparameter that can directly affect consumers' interest and acceptance of a product, showing the importance of color in people's perceptions and experiences.
As people begin to pay attention to food and beverage's "health and naturalness", natural coloring, one of the natural ingredients, has become increasingly important in how people perceive and experience food.
Unlike synthetic colors, natural colors are derived from plants, animals, fruits, insects, and minerals, while synthetic colors are derived from aniline dyes isolated from coal tar.
The study of color psychology also shows that colors are objectively stimulating and spirulina liquid symbolic to people.
Gardenia yellow - a natural pigment
People often use it in drinks (fruit-flavored drinks only) and candies because it gives them a feeling of warmth, frankness, cheer, and health.
The main component of gardenia yellow is carotenoid class of Tibetan flower blue spirulina powder pigment and Tibetan flower acid, which are obtained by crushing, extraction, filtration, sterilization, concentration, and spray drying the mature gardenia fruit.
In water, the powder dissolves into a transparent yellow liquid immediately and appears orange-yellow in color.
Carbon black is a natural pigment derived from plants
Many manufacturers are launching "blackened" products for young consumers who are seeking fun, such as tea and Fujiwara Hiroshi's "Cool Black Tillberry" drinks.
Carbon black from plants is an insoluble colorant, so it is usually used as a suspension, mainly in confectioneries and as a masking agent.
Natural melanin, vegetable black, vegetable carbon, carbon black, edible carbon black
The powder is black, odorless, tasteless, and dispersible in water and organic solvents.
Charred plant trunk and shell.
Related article reading:
テニスの上達法を知っていますか?
In our daily lives, coloring is almost indispensable
Is natural coloring less harmful than artificial coloring?
Be the first person to like this.
A data communication system is a broad term for equipment that transmits, exchanges, stores, and processes LEUNG Chi hong data by connecting computer-centered terminal devices or other computers in remote locations via communication lines. Computer networks, satellite communication, microwave communication, infrared communication, Bluetooth technology, and other current communication technologies are examples.
A computer network is a system that connects multiple autonomous computer systems in different geographical locations, as well as their external networks, via communication media to achieve resource sharing and information transfer under the management and coordination of network operating systems, network management software, and communication protocols. By network scope, computer networks are classified as local area networks, metropolitan area networks, and wide area networks.
Information engineering is a broader discipline than software engineering, encompassing all related disciplines required to establish a computerized enterprise based on modern database systems. The foundation of information engineering is a modern database system; the goal is to establish a computerized enterprise management system; and the scope is a broad, multi-technology, multi-disciplinary integrated system.
The establishment of an efficient management information system must be based on the overall organization's strategic level, as well as comprehensive planning of the organization's overall information system objectives, strategies, information resources, and system development efforts. Good system planning can ensure that the information system can support the organization's long-term strategic goals, develop and use the organization's information resources and information systems more effectively, and enable the construction of information systems under unified organizational goals, development strategies, and an effective environment.
The following are the main components of system planning: developing the overall scheme of the management information system, analyzing the current resource situation, conducting a feasibility study of the system, and specific development planning.
Strategic Set Transformation (SST), Business System Planning (BSP), Critical Success Factors (CSF), Business Information Analysis and Integration Technology (BIAIT), Output/Method Analysis (E/MA), and Return on Investment are some of the methods commonly used in MIS planning (ROI).
The planning of MIS should be done with the goal of improving the enterprise's management level and making radical changes to the existing system so that the enterprise's business processes can be fundamentally changed with the help of information systems. This necessitates business process redesign and reengineering to reduce the unreasonable parts of the business process and eliminate redundant steps, allowing the enterprise to respond to market and customer changes in a timely manner.
Related article reading:
Information Systems and Information Management (Bachelor of Science in Management)
What exactly is a management information system?
Prospects and career paths in management information systems
Be the first person to like this.